TM-9-2350-256-20-2

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2

JUNE 2005

TM-9-2350-256-20-2 - Page 1223 of 1440

TM 9-2350-256-20-2

0453 00

UNIT MAINTENANCE

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

NSN 2350-00-122-6826, EIC AQA

DIRECTIONAL SIGNAL CONTROL AND MOUNT ASSEMBLY REPLACEMENT

REMOVAL, INSTALLATION

INITIAL SETUP:

Tools and Special Tools

Tool kit, general mechanic’s (item 59, WP 0490 00)

Materials/Parts

Lockwashers (3) (item 638, WP 0491 00)

Nuts (2) (item 763, WP 0491 00)

Screws (3) (item 563, WP 0491 00)

WARNING

Be certain MASTER switch is OFF when working on electrical system to avoid electrical shock and

burns.

Removal

1.

Disconnect and remove wiring harness (1), clamp (2), screw (3), and lockwasher (4).

2.

Loosen clamp (5) and remove directional signal control (6).

3.

Remove two screws (7), clamp (8), mount assembly (9), two lockwashers (10), and two nuts (11).

Installation

1.

Install mount assembly (9), clamp (8), two screws (7), two lockwashers (10), and two nuts (11).

2.

Connect directional signal control (6) to mount assembly (9) and tighten clamp (5).

3.

Install clamp (2), lockwasher (4), and screw (3). Install wiring harness (1) and connect to directional signal control (6).

END OF WORK PACKAGE

0453 00-1/2 blank