TM-9-2350-256-20-2

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2

JUNE 2005

TM-9-2350-256-20-2 - Page 1276 of 1440

TM 9-2350-256-20-2

0473 00

CAUTION

Do not apply adhesive sealant to fire extinguisher nozzle caps.

3.

Install kit-furnished rubber cap (4) in two fire extinguisher nozzles (5) in main winch compartment.

NOTE

All of the following items are kit furnished unless otherwise noted.

4.

Install strainer assembly (6) and bilge pump assembly (7) with four screws (8), four lockwashers (9), and eight flat washers

(10).

5.

Install bent tube (11) with spanner wrench (item 10, WP 0465 00) and existing wiring harness (12) to bilge pump assembly

(7).

6.

Connect hose (13) to bent tube (11) with clamp (14).

7.

Connect bent tube (15) to hose (13) with clamp (16).

8.

Connect one end of hose (17) to bent tube (15) with clamp (18) and other end to bent tube (19) with clamp (20).

0473 00-2