TM-9-2350-256-20-2

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2

JUNE 2005

TM-9-2350-256-20-2 - Page 1287 of 1440

TM 9-2350-256-20-2

0478 00

UNIT MAINTENANCE

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

NSN 2350-00-122-6826, EIC AQA

SEALING INSPECTION

INITIAL SETUP:

Tools and Special Tools

Tool kit, general mechanic’s (item 59, WP 0490 00)

References

TM 9-2350-256-10

Inspection-Acceptance and Rejection Criteria

When time and facilities permit, engine compartment should be flooded with water. At this time, a thorough inspection should

be made at bulkhead and power takeoff drive shaft cover to determine any leaks. Engine should be operated (refer to TM

9-2350-256-10) to detect any malfunctions as a result of water leakage.

NOTE

Remove and stow two access plates from underside of engine compartment. This is done to prevent

buildup of sand during fording operations.

END OF WORK PACKAGE

0478 00-1/2 blank