TM-9-2350-256-20-2

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2

JUNE 2005
TM-9-2350-256-20-2

  TM-9-2350-256-20-2 - Page 1368 of 1440

TM 9-2350-256-20-2
0490 00
(1)
(2)
(3)
(4)
(5)
NATIONAL
ITEM NO
ITEM NAME
STOCK NUMBER
PART NUMBER
REFERENCE
17
Gage, wear, end connector
10887333
TM 9-2350-256-24P-1
18
Hammer, hand (mallet)
SC 4910-95-CL-A74
19
Handle (used with removers and/or replacers)
7082881
TM 9-2350-256-24P-1
20
Handle, remover and replacer (used with adapters
and/or replacers)
7083883
TM 9-2350-256-24P-1
21
Hose (for test run outside of vehicle)
12390186
TM 9-2350-256-24P-1
22
Hose assembly, nonmetallic (for emergency boom
operation)
11671580-5
TM 9-2350-256-24P-1
23
Hose assembly, nonmetallic (for emergency boom
operation)
11671580-4
TM 9-2350-256-24P-1
24
Hose assembly, nonmetallic (for emergency boom
operation)
11671580-3
TM 9-2350-256-24P-1
25
Hose assembly, nonmetallic, engine primer (for test
run outside of vehicle)
11671580-7
TM 9-2350-256-24P-1
26
Hose assembly, nonmetallic, main fuel line and fuel
injector return (for test run outside of vehicle)
11671580-6
TM 9-2350-256-24P-1
27
Inserter, screw thread (7/16-20)
MIL-T-21309
TM 9-2350-256-24P-1
28
Jackscrews
29
Key, socket head screw, 3/8 inches (in.) (set) hex,
4-1/4 in. (108.0 millimeters [mm] ) long
41-W-2456
SC 4910-95-CL-A74
30
Key, socket head screw, 5/8 in., hex, 6-1/4 in.
(158.8 mm) long
GGG-N-652
SC 4910-95-CL-A74
31
Kit assembly, gage, pressure
8356176
32
Lifter, roadwheel arm
7010355
TM 9-2350-256-24P-1
33
Multiplier, torque wrench
TD-1000
SC 4910-95-CL-A72
34
Parts kit, steering clutch housing output shaft
8708831
TM 9-2350-256-24P-1
35
Pliers set, retaining
SC 4910-95-CL-A74
36
Pliers, retaining ring
SC 4910-95-CL-A74
37
Pliers, retaining ring
SC 4910-95-CL-A74
38
Pliers, retaining ring, external
SC 4910-95-CL-A74
39
Puller and pump track end connector
40
Puller kit, mechanical
SC 4910-95-CL-A72
41
Puller, mechanical, compensating link bearing
7027414
42
Puller, slide hammer-type (used with adapters
and/or replacers)
5573615
TM 9-2350-256-24P-1
43
Punches, drive
GG-P-831
CTA 50-970
44
Remover and replacer, roadwheel hub inner bearing
cup or compensating idler wheel hub inner bearing
cup (used with handle 5120-00-708-3883)
7092876
TM 9-2350-256-24P-1
45
Remover and replacer, roadwheel hub outer bearing
cup or track support compensating idler wheel hub
outer bearing cup (used with handle 5120-00-708-3883)
7082834
TM 9-2350-256-24P-1
46
Replacer, roadwheel arm support spindle outer bearing
oil seal (used with handle 5120-00-473-7121)
7078973
TM 9-2350-256-24P-1
47
Replacer, track support roller wheel inner bearing oil seal 5120-00-473-7471
7082882
TM 9-2350-256-24P-1
48
Riveter, blind
SC 4933-95-CL-A11
49
Scale, indicating
SC 4910-95-CL-A72
50
Screws, cap (jackscrews)
0490 00-2


Back to Top