TM-9-2350-256-20-2

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2

JUNE 2005

TM-9-2350-256-20-2 - Page 336 of 1440

TM 9-2350-256-20-2

0221 00

Disassembly

1.

Disassemble wiring harness (see WP 0255 00 thru 0264 00, as appropriate).

Assembly

1.

Assemble wiring harness (see WP 0255 00 thru 0264 00, as appropriate).

Installation

1.

Connect two connectors (7 and 8) to bulkhead to APU, master relay, and rigger’s lights wiring harness (14).

2.

Connect five connectors (2 through 6) to bulkhead to main engine bracket and rear fuel tank transmitter wiring harness (13).

3.

Connect connector (1) to bulkhead disconnect (12).

4.

Install eight clamps (9) using lockwasher (11) and screw (10) for each.

NOTE

Follow-on maintenance: Install air inlet doors if removed (see WP 0341 00).

END OF WORK PACKAGE

0221 00-4