TM-9-2350-256-20-2

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2

JUNE 2005

TM-9-2350-256-20-2 - Page 412 of 1440

TM 9-2350-256-20-2

0237 00

Removal

1.

Remove connector (1) and gasket (4) from cover (5) by removing four screws (6) and four lockwashers (7).

2.

Unscrew cap (8) disconnect connector (2) from hydraulic oil temperature transmitter (9).

3.

Disconnect connector (3) from hydraulic oil high temperature switch (10).

Disassembly

1.

Disassemble wiring harness (see WP 0255 00 thru 0264 00, as appropriate).

Assembly

1.

Assemble wiring harness (see WP 0255 00 thru 0264 00, as appropriate).

Installation

1.

Connect connector (3) to hydraulic oil high temperature switch (10).

2.

Connect connector (2) to hydraulic oil temperature transmitter (9) and install cap (8).

3.

Install connector (1) and gasket (4) to cover (5) using four lockwashers (7) and four screws (6).

NOTE

Follow-on maintenance: Install oil temperature transmitter and switch housing assembly (see WP 0425

00).

END OF WORK PACKAGE

0237 00-2