TM-9-2350-256-20-2

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2

JUNE 2005
TM-9-2350-256-20-2

  TM-9-2350-256-20-2 - Page 829 of 1440

TM 9-2350-256-20-2
0361 00
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
SHIFTING CONTROLS AND LINKAGES MAINTENANCE
REMOVAL, DISASSEMBLY, ASSEMBLY, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Tool kit, general mechanic’s (item 59, WP 0490 00)
Pliers, retaining ring, external (item 37, WP 0490 00)
Materials/Parts
Bearing (item 91, WP 0491 00)
Bearings (2) (item 470, WP 0491 00)
Bearing units (3) (item 90, WP 0491 00)
Bolt (item 11, WP 0491 00)
Bolts (6) (item 339, WP 0491 00)
Bolts (3) (item 386, WP 0491 00)
Boot, rubber (item 34, WP 0491 00)
Clamp (item 344, WP 0491 00)
Keys (3) (item 698, WP 0491 00)
Lockwashers (3) (item 350, WP 0491 00)
Lockwashers (3) (item 619, WP 0491 00)
Lockwashers (2) (item 621, WP 0491 00)
Lockwashers (3) (item 639, WP 0491 00)
Lockwashers (21) (item 640, WP 0491 00)
Nuts (2) (item 676, WP 0491 00)
Nuts (12) (item 682, WP 0491 00)
Nuts (4) (item 685, WP 0491 00)
Pins, cotter (4) (item 108, WP 0491 00)
Pin, cotter (item 520, WP 0491 00)
Pin, straight (item 119, WP 0491 00)
Pin, straight (item 125, WP 0491 00)
Pin, straight (item 126, WP 0491 00)
Pins, straight (2) (item 163, WP 0491 00)
Pins, straight (2) (item 708, WP 0491 00)
Materials/Parts (cont.)
Screws (10) (item 402, WP 0491 00)
Screws (4) (item 403, WP 0491 00)
Screw (item 404, WP 0491 00)
Screws (6) (item 405, WP 0491 00)
Screws (3) (item 415, WP 0491 00)
Screws (2) (item 589, WP 0491 00)
Screws (2) (item 731, WP 0491 00)
Seals (5) (item 235, WP 0491 00)
Seal (item 851, WP 0491 00)
Spring (item 318, WP 0491 00)
Washers (2) (item 431, WP 0491 00)
Washers, flat (4) (item 537, WP 0491 00)
Washers, flat (4) (item 540, WP 0491 00)
References
WP 0175 00
WP 0362 00
Equipment Condition
Powerplant removed (see WP 0098 00)
Left-side air cleaner removed (see WP 0137 00)
Cab subfloor plates removed (see WP 0286 00 thru 0308
00)
Air inlet doors removed as necessary (see WP 0341 00)
Air inlet grilles removed as necessary (see WP 0342 00)
Ammunition rack removed (see WP 0386 00)
Toolbox rack removed (see WP 0389 00)
Oddment tray removed (see WP 0390 00)
NOTE
Only remove or open items necessary to gain access to area of linkage requiring removal.
0361 00-1


Back to Top