TM-9-2350-256-20-2

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2

JUNE 2005

TM-9-2350-256-20-2 - Page 888 of 1440

TM 9-2350-256-20-2

0365 00

NOTE

Steps 4 thru 6 refer to brake control adjustment.

4.

Place shift control lever (139) in PARK (P) position.

5.

Push brake pedal (4) down as far as possible. Brake pedal should lock in down position.

6.

If brake pedal (4) does not lock in down position, loosen two nuts on linkage rod (140). Adjust linkage rod until brake pedal

will lock in down position. Tighten nuts.

CAUTION

Adjust brakes only after making certain brake linkage alignment is correct.

CAUTION

Do not adjust travel of brake-apply-and-slack adjuster lever to less than 3 in. (76.2 mm) because of

possible damage to brakes.

NOTE

Alignment of black mark (141) on brake rod and black mark (142) on brake adjustment gage indicates

that brakes are applied and in proper adjustment.

0365 00-20