TM-9-2350-256-20-2
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2
JUNE 2005
TM-9-2350-256-20-2 - Page 929 of 1440
TM 9-2350-256-20-2
0378 00
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
25-TON SNATCH BLOCK RETAINER REPLACEMENT
REMOVAL, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Tool kit, general mechanic’s (item 59, WP 0490 00)
Materials/Parts
Weldless chain (item 5, WP 0484 00)
Nut (item 766, WP 0491 00)
Removal
1.
Remove snatch block retainer assembly (1) by removing nut (2) and pulling slotted retainer washer (3) away from hull-
mounted stud. Let slotted assembly chain (4) retainer washer hang by its snatch block retainer
2.
Disconnect snatch block retainer assembly chain (4) by opening two S-hooks (5).
Installation
1.
Connect snatch block retainer assembly chain (4) to hull and slotted retainer washer (3) with two S-hooks (5).
2.
Install snatch block retainer assembly (1) by placing slotted retainer washer (3) over hull-mounted stud and tightening nut
(2).
END OF WORK PACKAGE
0378 00-1/2 blank
Back to Top
