TM-9-2350-256-34

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

JULY 2005

TM-9-2350-256-34 - Page 273 of 584

TM 9-2350-256-34

0052 00

INTERMEDIATE MAINTENANCE

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

NSN 2350-00-122-6826, EIC AQA

MAIN

WINCH

MOTOR REPLACEMENT

REMOVAL, INSTALLATION

INITIAL SETUP:

Tools and Special Tools

Tool kit, general mechanic’s (item 34, WP 0086 00)

Materials/Parts

Gasket (item 7, WP 0087 00)

Lockwashers (8) (item 162, WP 0087 00)

Lockwashers (11) (item 163, WP 0087 00)

Packings (2) (item 132, WP 0087 00)

Packings (2) (item 133, WP 0087 00)

Packings (2) (item 134, WP 0087 00)

Materials/Parts (cont.)

Packing (item 137, WP 0087 00)

Screws (7) (item 70, WP 0087 00)

Screws (4) (item 71, WP 0087 00)

Screws (3) (item 76, WP 0087 00)

Screws (8) (item 216, WP 0087 00)

Screw (item 219, WP 0087 00)

Equipment Condition

Subfloorplates 2, 3, and 23 removed (TM 9-2350-256-20)

Removal

NOTE

Use Hydraulic Motor Kit 11672160 on retrofitted vehicles when replacing a motor which is not a

Dennison Model No. M4E-185-3N00-B101-M40712.

1.

Disconnect two hydraulic lines (1).

2.

Remove eight screws (2), lockwashers (3), and two adapter blocks (4) with hydraulic lines (5) attached. Discard lockwash-

ers.

3.

Remove two recessed packings (hidden) (6) and discard.

4.

Disconnect hydraulic line (7), two hydraulic lines (8), and three hydraulic lines (9).

5.

Remove four screws (10).

0052 00-1