TM 9-2350-256-34
0063 00
29.
Remove two screws (117), lockwashers (118), washers (119), and bracket (56). Discard lockwashers.
30.
Remove two screws (120), lockwashers (121), and washers (122) separating bracket (56) from metal bar (123). Discard
lockwashers.
31.
Remove bleeder valve (124), split flange (125), 16 hydraulic fittings (126), and magnetic plug (127).
NOTE
Perform step 32 to disassemble fittings (58) that were removed above. Note that the APU emergency
winch control valve (18) may have been already removed.
32.
Remove two couplings (128), APU emergency winch control valve (18), elbow (129), tee (130), and nipple (131).