TM-9-2350-256-34

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

JULY 2005

TM-9-2350-256-34 - Page 361 of 584

TM 9-2350-256-34

0065 00

10.

Remove four screws (45) and lockwashers (46). Discard lockwashers. Install shims (48) as required (four places) between

main hydraulic pump (40) and support (47).

NOTE

Step 11 is for horizontal alignment.

11.

Slide coupling (32) hubs together with a 1/8-in. (3.2-mm) separation. Tighten setscrews on coupling hubs and check

separation with a feeler gage at four places. If necessary, loosen four screws (45), move main hydraulic pump (40) as

required, and tighten four screws.

12.

Install gasket (43) on coupling (32) and slide housings together.

13.

Install packing (41) on unloading valve (36).

0065 00-9