TM-9-2350-256-34
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
JULY 2005
TM-9-2350-256-34 - Page 77 of 584
TM 9-2350-256-34
0006 00
INTERMEDIATE MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
PURGE PUMP
TROUBLESHOOTING PROCEDURE
INITIAL SETUP:
Tools and Special Tools
Tool kit, general mechanic’s (item 34, WP 0086 00)
Materials/Parts
Cleaning compound (item 5, WP 0085 00)
Paint thinner (item 18, WP 0085 00)
References
TM 9-2350-256-20
WP 0031 00
Troubleshooting Procedure
Purge Pump
Symptom
Purge pump malfunctioning.
Malfunction
Main engine manifold heaters do not work.
Do step 1.
Purge pump difficult to pump or does not pump. Do step 2.
CORRECTIVE ACTION
1.
Check manifold heater switch and associated wiring (TM 9-2350-256-20).
a.
Repair or replace defective components or parts (WP 0031 00).
WARNING
Solvents can burn easily, can give off harmful vapors, and are harmful to skin and clothing. To avoid
injury or death, keep away from open fire and use in a well-ventilated area. If solvent gets on skin or
clothing, wash immediately with soap and water.
2.
Disassemble purge pump (WP 0031 00). Clean all parts in paint thinner or cleaning compound. Inspect
all components for cracks, distortion, and/or evidence of excessive wear.
a.
Replace all defective components.
END OF WORK PACKAGE
0006 00-1/2 blank
Back to Top
