TM-9-2350-261-10

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

OPERATOR'S MANUAL

TM-9-2350-261-10 - Page 250 of 761

TM 9-2350-261-10

OPERATE 4.2 KW GENERATOR SET (M577A2 AND M1068 ONLY) — Continued

0032 00

3.

Connect auxiliary power cable to auxiliary power receptacle on top deck of carrier near driver’s hatch.

4.

Unroll auxiliary power cable to its full length.

NOTE

Generator must be level to operate properly.

5.

Locate a good position to set up generator set. Dig a shallow hole large enough for generator set. Keep bottom of hole

level.

6.

Set generator set in hole. Place sand bags around hole to camouflage generator set and help reduce noise during

operation. Have crew help.

7.

Connect auxiliary power cable to either receptacle on generator set. Make sure auxiliary power cable is concealed

and out of the way of personnel.

8.

Turn MASTER POWER SWITCH to ON.

0032 00-2