TM-9-2350-261-10
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
OPERATOR'S MANUAL
TM-9-2350-261-10 - Page 45 of 761
TM 9-2350-261-10
HOW TO USE THIS MANUAL (cont)
CAUTIONs call attention to actions or material that could damage equipment.
CAUTION
Improper cable removal can cause a short circuit. Remove negative cable before you remove
positive cable.
A sample CAUTION is shown above.
NOTEs contain information that makes the step and Work Package easier to do.
NOTE
When quick release pin is removed, mirror control knob will spring back into locked position.
A sample NOTE is shown above.
HELPER
Helpers are needed for Work Packages that require more than one person, such as lifting heavy objects or acting as an
observer.
If a helper is needed to perform a procedure, the INITIAL SETUP will list “Helper” under the PERSONNEL REQUIRED
heading.
If helper assists with a step, the step will include: “Have helper assist.”
If a helper performs the action alone, the step will start with “(H).”
Locational Terms
The terms FRONT, REAR, LEFT, and RIGHT are used to indicate where items are located on the carrier. Think of these
locations as if you were standing on the ramp facing the inside of the carrier.
xi/xii blank
Back to Top
