TM-9-2350-261-10

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

OPERATOR'S MANUAL

TM-9-2350-261-10 - Page 534 of 761

TM 9-2350-261-10

PREVENTIVE MAINTENANCE CHECKS AND SERVICES — Continued

0075 00

ITEM

NO.

INTERVAL

MAN-

HOUR

ITEM TO BE

CHECKED OR

SERVICED

CREWMEMBER

PROCEDURE

EQUIPMENT

NOT READY/

AVAILABLE

IF:

NOTE

New style drive sprockets (T150) have a

round circle for a wear indicator and do

not require track and sprocket gauge

to measure sprocket tooth wear. The

old drive sprockets (T130) require the

use of the track and sprocket gauge to

measure the sprocket teeth.

c.

Check sprocket teeth for wear. Use track

and sprocket gauge (WP 0094 00, Table

2

, Item 22) o n old s tyle drive s prockets

(T130) to measure sprocket teeth. If any

of the sprocket tooth does not extend

beyond gauge or wear indicator (on newer

sprockets), notify unit maintenance. New

style (T150) sprocket teeth have a wear

gauge as a part of the sprocket. If only one

side of sprocket shows wear, notify unit

maintenance to reverse sprocket.

Any sprocket

tooth fails

gauge test or

is worn to the

wear indicator.

d.

For both styles (T130 or T150), check

cushions for wear and damage. If cushions

appear to be moving on sprocket hub,

notify unit maintenance. If track shoes are

contacting sprocket hub flange, a thumping

sound will be heard. Cushions should be

replaced. Notify unit maintenance.

0075 00-86