TM-9-2350-261-20-4

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 4 OF 4

TM-9-2350-261-20-4 - Page 548 of 767

TM 9-2350-261-20-4

REPLACE FIRE EXTINGUISHER AND MOUNT (M1059 ONLY) — Continued

0771 00

CLEAN, INSPECT, AND REPAIR

1.

Inspect fire extinguisher trigger seal (11) and cap indicator (12). If cap indicator is extended or seal wire is broken,

notify supervisor.

INSTALLATION

1.

Install lanyard (10) with pin (1) attached on strap (2) with screw (7), washer (8), and new locknut (9).

2.

Install mount (6) on hull. Secure with four screws (4) and washers (5).

3.

Place fire extinguisher (3) in mount (6). Secure with strap (2).

4.

Install pin (1) in strap (2).

END OF TASK

0771 00-3/4 blank