TM-9-2350-261-24P
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE, DIRECT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST)
TM-9-2350-261-24P - Page 22 of 1180
SECTION I
TM 9-2350-261-24P
6
(1) CAGE column.
The Commercial and Government Entity (CAGE) code is a 5-digit numeric code
used to identify the manufacturer, distributor, or Government agency, etc., that supplies the item.
(2) PART NUMBER column.
Indicates the primary number used by the manufacturer (individual, firm,
or corporation, or Government activity), which controls the design and characteristics of the item by
means of its engineering drawings, specifications standards, and inspection requirements to identify
an item or range of items.
(3) STOCK NUMBER column.
This column lists the NSN for the associated part number and
manufacturer identified in the PART NUMBER and CAGE columns to the left.
(4) FIG. column.
This column lists the number of the figure where the item is identified/located in
Section II and III.
(5) ITEM column.
The item number is that number assigned to the item as it appears in the figure
referenced in the adjacent figure number column.
5. Special Information.
a.
USABLE ON CODE.
The usable on code appears in the lower left corner of the Description column
heading.
Usable on codes are shown as “UOC…” in the Description Column (justified left) on the first line
following the item description/nomenclature.
Uncoded items are applicable to all models. Identification of
the usable on codes used in the RPSTL are:
Code
Used On
V35
M113A2 Carrier, Personnel
V37
M577A2 Carrier, Command Post
011
M901A1 Combat Vehicle, Anti-Tank,
Improved TOW Vehicle
056
M1059 Carrier, Smoke
120
M1064 Carrier, Mortar, 120 mm Mortar
ACP
V83
M1068 Carrier, SICPS
M981 Carrier, Fist V
b. FABRICATION INSTRUCTIONS.
Bulk materials required to manufacture items are listed in the Bulk
Material portion of this RPSTL.
Part numbers for bulk materials are also referenced in the description
column of the line item entry for the item to be manufactured/fabricated. Detailed fabrication instructions
for items source coded to be manufactured or fabricated are found in TM 9-2350-261-20-1.
c. ASSEMBLY INSTRUCTION.
Detailed assembly instructions for items source coded to be assembled
from component spare/repair parts are found in TM 9-2350-261-20-1 and TM 9-2350-261-34.
Items that
make up the assembly are listed immediately following the assembly item entry or reference is made to
an applicable figure.
d. KITS.
Line item entries for repair parts kits appear in a group in Section II (see table of contents).
e. INDEX NUMBERS.
Items which have the word BULK in the figure column will have an index number
shown in the item number column.
This index number is a cross-reference between the National Stock
Number/Part Number index and the Bulk Material list in Section II.
f. ASSOCIATED PUBLICATIONS.
The publication(s) listed below pertain to Personnel Carriers M113A2,
M577A2, M1059, M901A1, M1064, and M1068 vehicles and their components.
Back to Top
