TM-9-2350-261-PMC

TM-9-2350-261-PMC - Page 8 of 11

AFTER OPERATION CHECKS

DRIVER

WARNING

Make sure carrier is on level surface and brakes

are set and locked.

*35. Check transmission oil level (with engine running)

*36. Check engine shut down.

WARNING

Hubs. final drive housing, and shock absorbers

can heat up enough to burn you.

*37. Check for overheating and/or damage to:

a. Road wheels and idler wheels

b. Final drive bearing

c. Sprockets

d. Shock absorbers

e. Track shoes and pins

f. Road wheel arms and torsion bars

*38. Check wheel hubs for damage, leaks. and missing grease fittings

or valves.

39. Drain contamination in fuel filters.

AFTER OPERATION CHECKS

GUNNER

*40. Conduct daily PMCS for 4.2 inch (M107-MM) mortar, using TM

9-1015-215-10, or for 81 MM mortar, using TM 9-1015-200-10.

NOTE

Assist carrier commander and driver (Weekly and

Monthly PMCS).

Refer to TM 9-2350-261-10 for Weekly and

Monthly PMCS.

8 of 8