TM-9-2350-277-10
CARRIER, M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; OPERATOR’S MANUAL
TM-9-2350-277-10 - Page 286 of 889
TM 9-2350-277-10
REFUEL CARRIER (M577A3 AND M1068A3 ONLY) — Continued
0026 00
WARNING
Sparks from static electricity could cause a fire or explosion. Metal nozzle must touch metal in
fuel filler neck when fuel is running.
7.
Insert nozzle in fuel filler neck. Fill fuel tank allowing 5 inches in fuel filler neck for expansion.
8.
Remove fuel nozzle from fuel filler neck.
NOTE
Carrier may have optional cap with pressure relief valve.
9.
Install fuel filler cap. Make sure keeper chain is all inside so cap goes on tight. If fuel cap has pressure relief valve, cap
is installed by turning clockwise until tight then pushing pressure relief valve handle down.
10. Close combat cover.
11. Lock combat cover from inside carrier by turning thumbscrew to the right. Tighten wingnut.
12. Remove fueling carrier ground wire from carrier.
END OF TASK
0026 00-5/6 blank
Change 1
Back to Top
