TM-9-2350-277-10

CARRIER, M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; OPERATOR’S MANUAL

TM-9-2350-277-10 - Page 407 of 889

TM 9-2350-277-10

SET UP COMMAND POST TENT (COVERED EXTENSION) (M577A3 ONLY) — Continued

0056 00

14. Raise and lock ramp (WP 0012 00).

15. Zip fastener and tie curtain under carrier.

16. Drive 34 staking pins through 34 footstops.

17. Drive eight staking pins for guy lines.

18. Secure and tighten guy lines.

19. Tie tapes around frame assembly legs.

20. Tie stowage cover to top edge of carrier and to sides of tent.

21. Unlock and lower ramp to ground (WP 0012 00).

22. Install electric light assembly and secure with tie.

23. Connect light assembly to one of two utility outlets on either side of ramp.

24. Secure eight straps inside enclosure, along junction of top and side, to frame.

0056 00-4