TM 9-2350-277-20-1
WAIT INDICATOR FLASHES DURING START ATTEMPTS (PREGLOW OR
AFTERGLOW)—Continued
0018 00
Y
1.
Remove front main wiring harness 12349873-1 (1) from J2
connector on controller (2).
2.
Remove engine wiring harness 12349873-1 jack (3) from engine
compartment bulkhead (4).
3.
Check continuity between engine compartment jack pin K (5)and
controller plug (6) pin A (7).
4.
Does multimeter read 0 ohm?
YES
NO
YN
1.
Repair or replace engine wiring
harness 12349873-1 circuit 406A
lead (WP 0359 00).
2.
Verify no faults found.
0018 00-2