TM 9-2350-277-20-1
MSD/ICE TEST 30 TURBOCHARGER OUTLET PRESSURE DIAGNOSTIC
TROUBLESHOOTING — Continued
0146 00
Y
1.
Install jumper wire between harness 12354672 plug P3
(1), pins 3 (2) and 4 (3).
2.
Measure resistance between plug W1 P1 (4), pins w (5) and x (6).
3.
Does MSD read 0 ohms?
YN
GO TO
CY
(PAGE 0146 00-7)
2Y
1.
Remove plug W1 P2 (1) from MSD/ICE distribution
box jack J2 (2).
2.
Measure resistance between the following plug pins:
W1 P1 (3), pin BB (4) to W1 P2 (1), pin AB (5)
W1 P1 (3), pin f(6)toW1P2(1)
,pinf (7)
W1 P1 (3), pin g(8)toW1P2(1)
,ping (9)
3.
Does MSD read 0 ohms for each measurement?
2YN
1.
Faulty W1 cable. Beyond unit
maintenance repair.
2.
Notify supervisor.
014600-2
Change 5