TM-9-2350-277-20-2

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 6

TM-9-2350-277-20-2 - Page 203 of 783

TM 9-2350-277-20-2

REMOVE/INSTALL POWER PLANT ASSEMBLY — Continued

0156 00

23. Install air intake elbow (9) on turbocharger inlet (10) and air cleaner (11). Secure with two clamps (12).

24. Install air restriction indicator hose (13) on bulkhead adapter (14) and reducer (15).

25. Install new strap (16) on hose (13) and air intake elbow (9).

26. Install air supply hose (17) on elbow (18) on air cleaner (11).

FOLLOW-THROUGH STEPS

1.

Lower power plant grill (WP 0464 00).

2.

Fill cooling system (WP 0227 00).

3.

Connect battery ground strap (WP 0337 00) or (WP 0338 00)

.

4.

Install propeller shafts and U-joints (WP 0405 00).

5.

Perform brake adjustment check (WP 0406 00).

6.

Start engine (see your -10). Check for leaks.

7.

Stop engine. Turn MASTER SWITCH OFF (see your -10).

8.

Install power plant rear access panel (see your -10).

9.

Install driver’s power plant access panel (see your -10).

END OF TASK

0156 00-23/24 blank

Change 2