TM-9-2350-277-20-2
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 6
TM-9-2350-277-20-2 - Page 311 of 783
TM 9-2350-277-20-2
REPLACE FUEL FILLER AND STRAINER PARTS (M577A3 AND M1068A3 ONLY) —
Continued
0186 00
4.
Install bushing (12), strainer assembly (13), and strainer element (14) into hull top opening and filler neck (2).
5.
Install flange (15) and new gasket (16) on hull top opening. Secure flange to filler neck (2) with 12 screws (17) and nuts
(18).
6.
Install two elbows (19) in filler neck (2) and connect two fuel tank vent hoses (20) to elbows.
7.
Install tee (21) on filler neck (2) and install elbow (22) on tee.
8.
Install elbow (23) in filler neck (2) and connect fuel tank vent tube (24) to elbow.
9.
Connect engine fuel return hose (25) to elbow (22) and APU fuel return tube (26) to tee (21).
FOLLOW-THROUGH STEPS
1.
Fill fuel tank (see your -10).
2.
Check filler tube and hoses for leaks.
3.
Install filler cap (WP 0185 00).
4.
Install filler cover and lock (WP 0183 00).
5.
Connect battery ground lead (WP 0338 00).
6.
Start engine (see your -10).
7.
Raise and lock ramp (see your -10).
8.
Stop engine (see your -10).
END OF TASK
0186 00-3/4 blank
Back to Top
