TM 9-2350-277-20-3
4.
Remove screw (1), lockwasher (2), and circuit 48 lead (3) from capacitor (4). Discard lockwasher.
5.
Remove screw (5), two lockwashers (6), capacitor (4), two ground leads (7)(8) and clamp (9) from hull. Remove clamp
from circuit 48 lead. Discard lockwashers.
6.
Remove cap (10) from receptacle (11).
7.
Remove eight screws (12), locknuts (13), two receptacles (11), and cap chain (14) from bracket (15). Discard locknuts.
INSPECT AND REPAIR
1.
Check for damaged connectors and terminals. Repair as needed (WP 0382 00).
0369 00-4
Change 2
Change 2
REPLACE BATTERY-TO-RADIO WIRING HARNESS (LEFT SIDE) (M113A3 AND
M1059A3 ONLY) — Continued
0369 00