TM-9-2350-277-20-4

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 4 OF 6

TM-9-2350-277-20-4 - Page 205 of 861

TM 9-2350-277-20-4

REPLACE HULL FRONT ACCESS COVER — Continued

0449 00

INSTALLATION

1.

If gasket is being replaced, apply a thin coat of adhesive to one side of new gasket and allow to dry 20-40 minutes.

Apply thin coat of adhesive to cleaned bottom side of cover. Allow to dry 30-120 seconds.

2.

Position gasket (4) on cleaned bottom side of cover (3). Align mounting holes in cover and gasket.

3.

Secure cover (3) and gasket (4) to hull with four screws (1) and washers (2). TORQUE SCREWS TO 40-50 LB-FT

END OF TASK

0449 00-2

Change 5

(54-68 N·m). Use torque wrench.