TM-9-2350-277-20-4

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 4 OF 6

TM-9-2350-277-20-4 - Page 409 of 861

TM 9-2350-277-20-4

REPLACE RAMP DOOR HANDLES AND SHAFT — Continued

0519 00

INSTALLATION

1.

Install new preformed packing (15), washer(s) (14), and shaft (8) on ramp (16).

2.

Install outside handle (13) on shaft (8). Secure with two washers (12), new lockwashers (11), and screws (10).

3.

Install key (9) on shaft (8).

4.

Install inside washer(s) (6), spacer (7), and inside handle (5) on shaft (8). Secure with new locknut (4).

NOTE

Make sure key ﬁts properly into inside handle.

5.

Align door lock (3) and two washers (2) with mount on ramp (16). Secure with pin (1).

6.

Adjust ramp door handles (Steps 1 - 4).

0519 00-2