TM-9-2350-277-20-4

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 4 OF 6

TM-9-2350-277-20-4 - Page 499 of 861

TM 9-2350-277-20-4

REPLACE AN/VVS-2 DRIVER’S NIGHT VISION MOUNT (ALL EXCEPT M58) — Continued

0537 00

8.

Remove spring (14) and key (15) from mount (2). Discard spring.

INSTALLATION

1.

Install key (1) and new spring (14) on mount (2).

2.

Apply adhesive to mating surface on mount and install new seal (15) in mount (2).

3.

Install two forward cleats (3), four new lockwashers (4), and screws (5) on mount (2).

4.

Apply adhesive to two screw threads (7) and install handle (6) and two screws (7) on rear cleat (8).

5.

Install rear cleat (8) and two viewer handles (9) on mount (2).

6.

Apply adhesive to mating surfaces of mounting hatch (16) and mount (2).

7.

Install new seal (11) on mounting hatch (16).

8.

Install mount (2), three new lockwashers (17), and screws (12) on driver’s hatch (10) and mounting hatch (16).

0537 00-2