TM-9-2350-277-20-4
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 4 OF 6
TM-9-2350-277-20-4 - Page 543 of 861
TM 9-2350-277-20-4
REPLACE DRIVER’S SEAT ASSEMBLY — Continued
0551 00
INSTALLATION
NOTE
Use washers as shims in front two holes between absorber and plate to ensure proper fit.
1.
Slide mounting plate (3) into seat rails (8).
2.
Install seat lock rack (7) on mounting plate (3). Secure with two screws (5) and new locknuts (6).
3.
Install seat assembly on absorber (4). Align holes in seat mounting plate (3) with threaded holes in absorber. Secure with
four screws (1) and washers (2).
FOLLOW-THROUGH STEPS
1.
Check seat and lock for proper operation.
END OF TASK
0551 00-2
Back to Top
