TM-9-2350-277-20-4

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 4 OF 6

  TM-9-2350-277-20-4 - Page 555 of 861

TM 9-2350-277-20-4
REPLACE DRIVER’S SEAT POST ASSEMBLY — Continued
0556 00
INSTALLATION
1.
Place post assembly (5) on lower bracket (4) and against sponson bracket (9). Secure post to sponson bracket with two
screws (6), washers (7), and strip (8).
2.
Secure lower end of post assembly (5) to lower bracket (4) with two screws (2) and new locknuts (3).
3.
Install bumper (1) inside post (5).
FOLLOW-THROUGH STEPS
1.
Install driver’s seat impact absorber (WP 0555 00).
2.
Install driver’s seat assembly (WP 0551 00)
END OF TASK
0556 00-2


Back to Top