TM-9-2350-277-20-4

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 4 OF 6

TM-9-2350-277-20-4 - Page 652 of 861

TM 9-2350-277-20-4

REPLACE RIGHT REARWARD TABLE (M577A3 ONLY)

0582 00

THIS WORK PACKAGE COVERS:

Removal (page 0582 00-1).

Installation (page 0582 00-2).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0926 00, Item 65)

Materials/Parts

Locknut (12)

Locknut (2)

Lockwasher (8)

Personnel Required

Unit Mechanic

References

See your -10

Equipment Condition

Engine stopped (see your -10)

Carrier blocked (see your -10)

Ramp lowered (see your -10)

REMOVAL

1.

Remove sixteen screws (1), eight spacers (2), and two drop leaves (3) from table top (4).

2.

Remove eight screws (5), lockwashers (6), and four catches (7) from two drop leaves (3). Discard lockwashers.

3.

Remove three nuts (8), washers (9), screws (10), and table top (4) from hull.

NOTE

Shims (ﬂat washers – two maximum) may be required to obtain clearance between screw and

support bracket.

4.

Remove two locknuts (11), washers (12), screws (13), four table supports (14), and shims (if installed) from hull.

Discard locknuts.

5.

Remove sixteen screws (15), eight spacers (16), hinges (17), and four supports (14) from table top (4).

6.

Remove twelve locknuts (18), washers (19), screws (20), and four braces (21) from supports (14). Discard locknuts.

0582 00-1