TM-9-2350-277-20-4
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 4 OF 6
TM-9-2350-277-20-4 - Page 740 of 861
TM 9-2350-277-20-4
REPLACE/REPAIR ANTENNA MAST BRACKET ASSEMBLY, TAILLIGHT WIRING
HARNESS, AND BRACKET (M1068A3 ONLY) — Continued
0625 00
INSTALLATION
NOTE
Replace damaged rubber pads.
1.
Install new rubber pads (8)(9) on antenna mast brackets (1)(7).
a.
Apply a thin, even coat of adhesive to the rubber pad surfaces (8)(9). Allow to dry 20 to 40 minutes. Apply a thin,
even coat of adhesive to the inside of the brackets (1)(7). Allow to dry 30 to 120 seconds. Press the surfaces of the
rubber pads (8) and brackets (1)(7) with the adhesive on them together firmly.
0625 00-7
Back to Top
