TM-9-2350-277-20-5

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 5 OF 6

TM-9-2350-277-20-5 - Page 336 of 1047

TM 9-2350-277-20-5

REPLACE PERSONNEL HEATER WIRING HARNESS GUIDE (M577A3

AND M1068A3) — Continued

0707 01

INSTALLATION

CAUTION

Insure harnesses and cables are routed in front of guide and away from personnel heater

exhaust pipe.

NOTE

Personnel heater assembly is not shown for clarity. It is not required to remove the personnel

heater assembly to perform this task.

1.

Install V-bend (1) of guide (2) in cutout (10) into traverse beam (11).

2.

Install harness (9), clamp (5), and new lockwasher (3), compartment heater ground wire (4), new lockwasher (8), screw

(7), and guide (2).

3.

Install four new tie straps (6) on harness (9).

END OF TASK

0707 01-3/4 blank

Change 4