TM-9-2350-277-20-5

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 5 OF 6

TM-9-2350-277-20-5 - Page 465 of 1047

TM 9-2350-277-20-5

INITIAL INSTALLATION OF LITTER KIT (M113A3 ONLY) — Continued

0741 00

NOTE

Spall liners must be returned to stock or stored for future use.

All four mounting brackets, posts, and chain assemblies are installed in the same way.

1.

Install upper post pin (1) and lockwasher (2) into hull ceiling.

NOTE

Locate mounting brackets in the forward two and rearmost two position.

2.

Install four mounting brackets (6)on sponson and secure with two washers (7), screws (8), lockwasher (10)and screw (9).

0741 00-2

3.

Place top of post (5) under pin (1). Lift post as far as it will go.

4.

Lower bottom of post (5) into mounting bracket (6).

5.

Install retainer pin (4) in post (5). Turn pin down.

6.

Install spring pin (3) into end of retainer pin (4) and secure.

Change 1