TM-9-2350-277-20-5

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 5 OF 6

TM-9-2350-277-20-5 - Page 623 of 1047

TM 9-2350-277-20-5

REPLACE SMOKE GENERATOR GLOW PLUG CABLE ASSEMBLIES (M1059A3 ONLY) —

Continued

0772 00

INSTALLATION

NOTE

There are two exterior cables, access plates, and smoke generators, left and right. Cables are

installed on vehicle the same way. Only one exterior cable, access plate, and smoke generator is

shown. Remove cables as required.

1.

Install interior cable (1), four screws (2) and new locknuts (3) to right access plate (4).

2.

Connect exterior cable (5) to preheat harness jack (6) on panel (7) of right smoke generator (8).

3.

Connect exterior cable (5) to interior cable (1) in right access plate (4).

4.

Install interior cable (1), four screws (2) and new locknuts (3) to left access plate (4).

5.

Connect exterior cable (5) to interior cable (1) in left access plate (4).

6.

Connect exterior cable (5) to preheat harness jack (6) on panel (7) of left smoke generator (8).

0772 00-4