TM-9-2350-277-20-6

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 6 OF 6

TM-9-2350-277-20-6

  TM-9-2350-277-20-6 - Page 25 of 487

TM 9-2350-277-20-6
REPLACE APIU RACK MOUNT AND BRACKET (M1068A3 ONLY) — Continued
0813 00
4.
Remove two locknuts (14), screws (15), spacers (16), washers (17), and hanger (18) from bulkhead mount (19) and
rack (9). Discard locknut.
5.
Remove three locknuts (20), screws (21), six washers (22), and rack (9) from three bulkhead mounts (19). Discard
locknuts.
INSTALLATION
1.
Align spacer (1) and hanger (2) with bulkhead mount (3). Secure with screw (4), two washers (5), and new locknuts (6).
2.
Align rack (7) with three bulkhead mounts (3). Secure with three screws (8), six washers (9), and new locknuts (10).
3.
Position spacer (1) between rack (7) and hanger (2). Secure with screw (4), two washers (5), and new locknut (6).
4.
Install mount (11) on APIU rack (7). Secure with four washers (12), screws (13), and new locknuts (14).
5.
Install bracket (15) and clamp (16) on APIU rack (7). Secure with four washers (17), two screws (18), and new
locknuts (19).
0813 00-2


Back to Top