TM-9-2350-277-20-6

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 6 OF 6

TM-9-2350-277-20-6 - Page 390 of 487

TM 9-2350-277-20-6

REPLACE CYLINDER DISCHARGE TUBES — Continued

0899 00

INSTALLATION

1.

Place three clamps (1) on tube (2). Install nozzle (3) and union (4) on tube.

2.

Install union (5) in driver’s bulkhead. Secure with nut (6).

3.

Place clamp (7) on tube (8). Install tube on two unions (4) and (5).

4.

Place clamp (9) on tube (10). Install union (11) on tube, and install tube on union (5).

5.

Place clamp (12) on tube (13). Install tube on union (11) and fire extinguisher cylinder (14).

6.

Align six clamps (1), (7), (9), and (12) with six hull weldnuts. Secure clamps to weld- nuts with six screws (15) and new

lockwashers (16).

FOLLOW-THROUGH STEPS

1.

If removed, install power plant (WP 0156 00).

2.

Close power plant access door. See TM 9-2350-277-10.

END OF TASK

0899 00-3/4 blank

Change 5