TM-9-2350-277-20-6
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 6 OF 6
TM-9-2350-277-20-6 - Page 474 of 487
TM 9-2350-277-20-6
REPLACE CHEMICAL ALARM M43 UNIT INTERFACE WIRING HARNESSES (M113A3
ONLY) — Continued
0923 00
6.
Install insulator washer (11), flat washer (10), lockwasher (9), nut (8), bushing (7), retainer (6), spring tension washer (5)
and coupling nut (4) on harness (12).
7.
Install four backshells (2) and C-clip retainers (1) on leads (3).
8.
Attach wiring harness (13) to bracket (14) with four screws (15) and new locknuts (16).
9.
Attach four leads (3) to leads (17) as follows:
509E to 509G
509F to 509H
6D POS to 6E POS
7D NEG to 7E NEG
10. Install bracket (14) on vehicle with four screws (18) and washers (19).
FOLLOW-THROUGH STEPS
1.
Connect battery ground strap (WP 0337 00).
2.
Start engine (see your -10).
3.
Raise and lock ramp (see your -10).
4.
Stop engine (see your -10).
END OF TASK
0923 00-7/8 blank
Back to Top
