TM-9-2350-277-24P
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST)
TM-9-2350-277-24P - Page 35 of 1252
SECTION I
TM 9-2350-277-24P
7
engineering drawings, specifications, standards, and inspection requirements to identify an item or range of
items.
(3) STOCK NUMBER column.
This column lists the NSN for the associated part number and
manufacturer identified in the PART NUMBER and CAGEC columns to the left.
(4) FIGURE NUMBER column.
This column lists the number of the figure where the item is
identified/located in Section II and III.
(5) ITEM NUMBER column.
The item number is that number assigned to the item as it appears in the
figure referenced in the adjacent figure number column.
5.
Special Information
Use the following subparagraphs as applicable:
a. USABLE ON CODES.
The usable on code appears in the lower left corner of the Description Column
heading. Usable on codes are shown as "UOC:" in the Description Column (justified left) on the first line
applicable item/nomenclature. Uncoded items are applicable to all models. Identification of the usable on
codes used in the RPSTL are:
Code
Used On
APC
M113A3
AP2
M1064A3
AP3
M1068A3
AP5
M577A3
AP6
M1059A3
AP8
M58
NOTE
M113A3AMB has no unique Usable On Code.
It is common with the
M113A3, with the exception of spall liners, personnel seats, and
commander’s gun mount.
b. FABRICATION INSTRUCTIONS
. Bulk materials required to manufacture items are listed in the Bulk
Material Functional Group of this RPSTL. Part numbers for bulk materials are also referenced in the
description column of the line item entry for the item to be manufactured/fabricated. Detailed fabrication
instructions for items source coded to be manufactured or fabricated are found in TM 9-2350-277-24P.
c. ASSEMBLY INSTRUCTIONS
. Detailed assembly instructions for items source coded to be assembled
from component spare/repair parts are found in TM 9-2350-277-20-1, 20-2 and TM 9-2350-277-34. Items that
make up the assembly are listed immediately following the assembly item entry or reference is made to an
applicable figure.
d. KITS
. Line item entries for repair parts kits appear in group 9401 in Section II.
e. INDEX NUMBERS
. Items which have the word BULK in the figure column will have an index number
shown in the item number column. This index number is a cross-reference between the National Stock
Number/Part Number Index and the bulk material list in Section II.
Change 2
Back to Top
