TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 224 of 871

TM 9-2350-277-34

REPAIR MULTIPIN CONNECTORS — Continued

0026 00

INSTALL CABLE CONNECTOR

NOTE

If replacing lead, cut new wire from bulk supply. Measure original length, gauge, and type of

wire.

1.

Strip insulation from leads of cable (3) to uncover just enough wire to ﬁll well in contact (5).

2.

Slide retaining nut (1) and coupling nut (6) on cable (3).

3.

Push leads of cable (3) through grommet (4) and insert in new contacts (5).

NOTE

Make sure leads pass through proper lettered hole in grommet.

4.

Solder leads in contacts (5) and press contacts into grommet (4). Check leads for resistance.

5.

Align and install grommet (4) in plug (2). Secure with retaining nut (1).

END OF TASK

0026 00-3/4 blank