TM 9-2350-277-34
REPLACE FRONT MAIN WIRING HARNESS — Continued
0030 00
32. Remove two front screws (11) and lockwashers (12) from voltage regulator mounting plate (13). Discard lockwashers.
33. Loosen two rear screws (14) from voltage regulator mounting plate (13). Slide voltage regulator (15) from mounts
for access.
34. Remove from inside of power plant compartment three screws (1), lockwashers (2), and clamps (3) that secure wiring
harness (4) on driver’s bulkhead. Remove wiring harness from bulkhead. Discard lockwashers.
0030 00-12
Change 5