TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 388 of 871

TM 9-2350-277-34

REPAIR COMMANDER’S CUPOLA HINGES (M113A3, M1059A3, M1064A3, AND M58

ONLY) — Continued

0054 00

INSTALLATION

1.

Clamp or tack weld new hinge(s) parts (1), (2), or (3) on hatch (4). Set cover on commander’s cupola. Check alignment

of cover hinges with hinges on hull.

2.

Make sure hinges (1), (2), or (3) are aligned and spaced as shown.

3.

Weld hinges (1), (2), or (3) to hatch (4). See TM 9-237. Use electrode type 5356.

4.

Clean the weld area and apply touch-up paint to all bare metal. See TM 43-0139.

FOLLOW-THROUGH STEPS

1.

Install commander’s cupola cover on carrier (see your -20).

END OF TASK

0054 00-3/4 blank