TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 506 of 871

INSTALL PERSONNEL HEATER KIT (M1064A3 ONLY) — Continued

8.

Secure plenum (1) to personnel heater (2) with four lockwashers (3) and screws (4).

9.

Secure two saddles (5) to two brackets (6) with four screws (7), three lockwashers (8), ground strap (9), and four

locknuts (10).

10. Install two clamps (11) on two saddles (5).

11. Install clamp (12) on heater air intake pipe (13) and clamp (14) on heater exhaust port (15).

12. Install elbow (16) on heater air intakepipe(13)andairintakeelbow(17)

.

13. Position heater (2) and shield (18) on two saddles (5), and secure with two clamps (11). Ensure air intake and exhaust

fittings are properly aligned.

14. Tighten clamp (14) on heater exhaust port (15) and exhaust pipe in carrier.

15. Tighten clamp (12) on heater air intake pipe (13).

007300-3

Change 4

0073 00

TM 9-2350-277-34