TM-9-2350-277-34
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
TM-9-2350-277-34 - Page 738 of 871
TM 9-2350-277-34
REPAIR PHONE EXTENSION BOX A14 (M1068A3 ONLY) — Continued
0102 00
ASSEMBLY
1.
If removed, install new gaskets (12) by applying a thin coat of adhesive to phone extension box surface and to gasket
surface. Allow 10 to 20 minutes to dry (tacky to the touch). Position gasket on phone extension box and press firmly into
place.
NOTE
Use wiring diagram page 0102 00–2 to identify location of post by color and for rewiring
connector J1 and binding posts.
2.
Install leads (11) in connector J1 (10).
3.
Install connector J1 (10) on phone extension box (4). Secure with four screws (9) and new locknuts (8).
4.
Install 24 binding posts (6) on faceplate (3).
5.
Connect all leads (5) to 24 binding posts (6).
6.
Install new straps (7), as required.
7.
Install faceplate (3) on phone extension box (4). Secure with 12 new lockwashers (2) and screws (1).
FOLLOW-THROUGH STEPS
1.
Stow phone extension box in stowage box (see your -20).
END OF TASK
0102 00-3/4 blank
Back to Top
