TM-9-2350-277-40-P
CARRIER, PERSONNEL, FULL TRACKED, ARMORED M113A3; CARRIER, COMMAND POST, LIGHT TRACKED M577A3; CARRIER, MORTAR, 120 MM M121, SELF-PROPELLED M1064A3; CARRIER, STANDARDIZED INTEGRATED COMMAND POST SYSTEM (SICPS) M1068A3; CARRIER, MECHANIZED SMOKE OBSCURANT M58
TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
APRIL 2012
TM-9-2350-277-40-P - Page 17 of 472
Page No.
WP Sequence No.
FINAL TEST – COOLANT HEATER.
..........................................................................................
WP 0025
Figure 1.
Coolant Heater Test Setup.
...............................................................................
0025-1
Figure 2.
Coolant Check.
..................................................................................................
0025-2
Figure 3.
Electrical Check.
...............................................................................................
0025-3
Figure 4.
Exhaust Venting.
...............................................................................................
0025-4
Figure 5.
Operational Check.
...........................................................................................
0025-6
Figure 6.
Wiring Diagram.
................................................................................................
0025-7
REPLACE FUEL CONTROL VALVE.
.........................................................................................
WP 0026
Figure 1.
Fuel Control Valve – Removal.
.........................................................................
0026-1
Figure 2.
Guard – Removal.
.............................................................................................
0026-2
Figure 3.
Fuel Control Valve Leads – Disconnect.
...........................................................
0026-2
Figure 4.
Fuel Control Valve Flow Test.
...........................................................................
0026-3
Figure 5.
Fuel Control Valve Flow Test (Continued).
.......................................................
0026-4
Figure 6.
Fuel Control Valve Leak Test.
...........................................................................
0026-4
Figure 7.
Fuel Control Valve Leads – Connect.
...............................................................
0026-5
Figure 8.
Guard – Installation.
..........................................................................................
0026-5
Figure 9.
Fuel Control Valve – Installation.
......................................................................
0026-6
REPLACE RESTRICTION THERMOSTAT.
................................................................................
WP 0027
Figure 1.
Blower Assembly and Combustion Tube – Removal.
.......................................
0027-1
Figure 2.
Restriction Thermostat – Removal.
...................................................................
0027-2
Figure 3.
Restriction Thermostat – Installation.
................................................................
0027-2
Figure 4.
Combustion Tube and Blower Assembly – Installation.
....................................
0027-3
REPLACE OVERHEAT THERMOSTAT.
....................................................................................
WP 0028
Figure 1.
Guard – Removal.
.............................................................................................
0028-1
Figure 2.
Overheat Thermostat – Removal.
.....................................................................
0028-2
Figure 3.
Overheat Thermostat – Installation.
..................................................................
0028-3
Figure 4.
Guard – Installation.
..........................................................................................
0028-4
REPLACE FIXED RESISTOR.
....................................................................................................
WP 0029
Figure 1.
Fixed Resistor – Removal.
................................................................................
0029-1
Figure 2.
Fixed Resistor – Testing.
..................................................................................
0029-2
Figure 3.
Fixed Resistor – Installation.
.............................................................................
0029-3
REPLACE BURNER PACKING AND GASKET.
.........................................................................
WP 0030
Figure 1.
Burner Packing and Gasket – Removal.
...........................................................
0030-1
Figure 2.
Burner Packing and Gasket – Installation.
........................................................
0030-2
REPLACE DIODE AND MOTOR RESISTOR.
............................................................................
WP 0031
Figure 1.
Guard – Removal.
.............................................................................................
0031-1
Figure 2.
Diode/Motor Resistor – Removal.
.....................................................................
0031-2
Figure 3.
Diode – Testing.
................................................................................................
0031-2
Figure 4.
Motor Resistor – Testing.
..................................................................................
0031-3
Figure 5.
Diode/Motor Resistor – Installation.
..................................................................
0031-3
Figure 6.
Guard – Installation.
..........................................................................................
0031-4
REPLACE BLOWER MOTOR.
....................................................................................................
WP 0032
Figure 1.
Blower Assembly – Removal.
...........................................................................
0032-1
Figure 2.
Blower Motor – Disassembly, Assembly.
..........................................................
0032-2
Figure 3.
Blower Assembly – Installation.
........................................................................
0032-3
TM 9-2350-277-40&P
TABLE OF CONTENTS – Continued
vii
CHANGE 1
Back to Top
