TM-9-2350-311-24P-1
HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A2, M109A3, M109A4 AND M109A5
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST
SEPTEMBER 1994
TM-9-2350-311-24P-1 - Page 14 of 637
TM 9-2350-311-24P-1
D
-Depot is the lowest level that can do complete repair of the item.
Z
-Nonrepairable. No repair is authorized.
B
-No repair is authorized. (No parts or special tools are authorized for the
maintenance of a “B” coded item.) However, the item may be reconditioned by
adjusting, lubricating, etc., at the user level.
(3) Recoverabilitycode
Recoverability codes are assigned to items to indicate the disposition
action on unserviceable items. The recoverability code is entered in the fifth position of the SMR Code as follows:
Recoverability
Application/Explanation
Codes
Z
-Nonrepairable item. When unserviceable, condemn and dispose of the item
at the level of maintenance shown in 3rd position of SMR Code.
O
-Repairable item. When uneconomically repairable, condemn and dispose of
the item at unit or aviation unit level.
F
-Repairable item. When uneconomically repairable, condemn and dispose of
the item at the direct support or aviation intermediate level.
H
-Repairable item. When uneconomically repairable, condemn and dispose of
the item at the general support level.
D
-Repairable item. When beyond lower level repair capability, return to depot.
Condemnation and disposal of item not authorized below depot level.
L
-Repairable item. Condemnation and disposal not authorized below
Specialized Repair Activity (SRA).
A
-Item requires special handling or condemnation procedures because of
specific reasons (e.g., precious metal content, high dollar value, critical
material, or hazardous material). Refer to appropriate manuals/directives for
specific instructions.
c. CAGEC(Column(3)). The Commercial and Government Entity Code (CAGEC) is a 5-digit numeric code
which is used to identify the manufacturer, distributor, or Government agency, etc., that supplies the item.
d. PART NUMBER(Column(4)). Indicates the primary number used by the manufacturer (individual,
company, firm, corporation, or Government activity), which controls the design and characteristics of the item by
means of its engineering drawings, specifications, standards, and inspection requirements to identify an item or
range of items.
NOTE:
When you use a NSN to requisition an item, the item you receive may have a different part number
from the part ordered.
e.
This column includes the following
information:
(1) The federal item name, and when required, a minimum description to identify the item.
(2) The physical security classification of the item is indicated by the applicable parenthetical entry
(e.g., Phy Sec Cl (C) - Confidential, Phy Sec Cl (S) - Secret, Phy Sec Cl (T) - Top Secret).
4
DESCRIPTION AND USABLE ON CODE (UCO)(Column (5)).
Back to Top
