TM-9-2510-247-13-P

FIFTH WHEEL TOWING DEVICE MODEL 250M

TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT MAINTENANCE MANUAL, REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2004

TM-9-2510-247-13-P - Page 272 of 522

TM 9-2510-247-13&P

0057 00

REMOVAL OF PRIMARY MOTOR - Continued

NOTE

There are two hydraulic motors - primary (3) and isolated (11).

The solenoid to primary motor wire must be removed from primary motor prior to removal.

1. Loosen two mounting bolts (1).

2. Remove solenoid to motor wire (2) from primary motor (3).

3. Disconnect hose from elbow (4) on primary motor (3).

4. Disconnect two straight adapters (5).

5.

Remove two screws (6), lockwashers (7), and flatwashers (8) from bracket (9) on primary

motor (3). Discard lockwashers.

6.

Loosen two screws (10) and remove primary motor (3) from bracket.

Figure 105.

Hydraulic Motor Assembly