TM-9-2510-247-13-P

FIFTH WHEEL TOWING DEVICE MODEL 250M

TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT MAINTENANCE MANUAL, REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2004

  TM-9-2510-247-13-P - Page 8 of 522

TM 9-2510-247-13&P
WARNING SUMMARY
WARNING
GENERAL
After washing the fifth wheel towing device, ensure appropriate breather valve is opened prior to operation
of the fifth wheel towing device. Failure to comply may result in injury or death to personnel.
Improper cleaning methods and use of unauthorized cleaning liquids or solvents can cause injury or death
to personnel and damage equipment. To prevent this, refer to TM 9-247 for further instructions.
No personnel shall perform maintenance above or below the main frame without the main frame being
supported at the front by use of a jack stand or the prime mover.
Failure to comply may result in injury or
death to personnel.
WARNING
TRANSPORT
Ensure the top hydraulic pressure release valve is open prior to operating hydraulics. Failure to comply could
cause injury or death to personnel or damage to equipment.
Ensure the boom has sufficient overhead clearance prior to folding the boom into a vertical position. Failure
to comply may result in injury or death to personnel.
DO NOT operate boom until mast is in track. Failure to comply could cause serious injury or death to
personnel or damage to equipment.
Visibility from the prime mover is significantly reduced when backing.
Proper procedures must be followed
and extreme caution used when backing to prevent injury or death to personnel or damage to equipment.
WARNING
FOLDING/UNFOLDING
Operators must take caution while folding the mast assembly to the vertical position. The transport leg
assembly does not stay locked in the vertical position. The handle will swing free and may cause injury or
death to personnel.
Ensure tool boxes are closed and the main frame is free of all unsecured items. Failure to comply may result
in injury or death to personnel.
f


Back to Top