TM-9-2520-215-34
CROSS-DRIVE TRANSMISSION ASSEMBLY
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
DECEMBER 2005
TM-9-2520-215-34 - Page 151 of 508
TM 9--2520--215--34
0033 00--3
COOLER BYPASS, LUBRICATION AND CONVERTER PRESSURE
REGULATOR VALVE ASSEMBLY REPAIR – CONTINUED
0033 00
DISASSEMBLY – Continued
5. Remove cooler bypass valve (16) from valve body (5).
5
16
CLEANING
See WP 0018 00 for cleaning procedure.
INSPECTION
See WP 0018 00 for general inspection and repair recommendations.
FIT AND WEAR LIMITS
Check the following parts to the dimensions listed. Replace if not within the specified dimensions.
PART NAME
CHECK POINTS
ACCEPTABLE LIMITS
Converter oil pressure regulator valve
helical compression inner spring
Converter oil pressure regulator valve
helical compression outer spring
Converter oil pressure regulator valve
Cooler bypass valve helical compres-
sion spring
Lubrication oil pressure regulator valve
helical compression spring
Valve body
Free length
Length under 46 to 56 pound load
Free length
Length under 66 to 80 pound load
Outside diameter (2 places)
Clearance fit in valve body
Maximum clearance between valve and
valve body
Free length
Length under 72 to 88 pound load
Free length
Length under 13.5 to 16.5 pound load
Inside diameter of converter oil pressure
regulator valve hose
3.998 in.
2.400 in.
4.237 in.
2.400 in.
1.3730 to 1.3735 in.
0.0010 to 0.0025 in.
0.0045 in.
2.033 in.
1.500 in.
2.892 in.
2.000 in
1.3745 to 1.3755 in
Back to Top
